Supermicro System SYS-7047R-72RF 4U E5-2600 C602 8x3.5inch Hotswap SAS-SATA PCI Express 920W Redundant
Processor
CPU:
Intel Xeon E3-2600
Dual Socket B2 (LGA 2011)
Cache:
Up to 20MB
System Bus:
QPI up to 8 GT/s
System Memory
Memory Capacity:
16x 240-pin DDR3 DIMM sockets
Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 192 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type:
1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes:
32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage:
1.5V / 1.35V
Error Detection:
Corrects Single-Bit Errors
Detects Double-bit Errors (Using ECC Memory)
On-Board Devices
Chipset:
Intel C602 Chipset
SATA:
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
SAS:
SAS2 From LSI 2208
HW RAID 0, 1, 5, 6, 10, 50, 60 Support
Network Controllers:
Intel i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video:
G200 (Nuvoton WPCM450 BMC with graphic controller)
Super I/O:
Nuvoton W83527
Input/Output
Serial ATA:
2 x SATA 3.0 Ports (6Gbps)
8 x SATA 2.0 Ports (3Gbps)
LAN:
2 x RJ45 LAN Ports
1 x RJ45 Dedicated IMPI LAN Ports
USB:
7 USB 2.0 ports total (4 Rear, 2 Via Header, 1 Type A
Video:
1x VGA port
Serial Port/Header:
2x Fast UART 16550 ports
Expansion Slots
PCI-Express:
1x PCI-E 3.0 x16
6x PCI-E 3.0 x8
System Bios
BIOS Type:
64Mb SPI Flash EEPROM with AM BIOS
BIOS Features:
Plug and Play (PnP)
APM 1.2
DMI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Front Panel
Buttons:
Power On/Off Button
System Reset Button
LEDs:
Power LED
Hard Drive Activity LED
2 x Network Activity LEDs
Power Fail LED
Ports:
2 x USB Ports
Drive Bays
Hotswap:
8 x Hotswap 3.5 SAS2/SATA Drive Trays
Peripheral Bay(s) (90 Rotatable): 2 x 5.25 Peripheral Drive Bays
1x 5.25 Bay that fits 3.5 Bay Devices
System Cooling
Fans:
3x 5000 RPM Hot-swap PWM Cooling Fans
2x 5000 RPM Hot-swap Rear Exhaust PWM Fans
Power Supply
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input:
100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output:
4 Amp at +5V standby
75 Amp at +12V
With Power Distributor:
+5V: 45 Amp
+3.3V: 24 Amp
-12V: 0.6 Amp
Certifications:
80 PLUS Platinum Certified
PC Health Monitoring
CPU:
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator.
FAN:
Total of eight fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
Thermal Monitor 2 (TM2) support
PECI
LED:
CPU/System Overheat LED
Suspend Static Indicator LED
UID/Remote LED
Other Features:
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment
RoHS:
RoHS Compliant
Environmental Specs:
Operating Temperature: 10 to 35C (50 to 95F)
Non-operating Temperature: -40 to 70C (-40 to 158F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Form Factor
4U Rackmountable / Tower
Optional Rackmount Kit
Colors
Black
Item Dimension (L"xW"xH")
25.5 x 17.2 x 7
Weight
58.00 lb
Warranty Information
1 Year
CPU:
Intel Xeon E3-2600
Dual Socket B2 (LGA 2011)
Cache:
Up to 20MB
System Bus:
QPI up to 8 GT/s
System Memory
Memory Capacity:
16x 240-pin DDR3 DIMM sockets
Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 192 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type:
1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes:
32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage:
1.5V / 1.35V
Error Detection:
Corrects Single-Bit Errors
Detects Double-bit Errors (Using ECC Memory)
On-Board Devices
Chipset:
Intel C602 Chipset
SATA:
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
SAS:
SAS2 From LSI 2208
HW RAID 0, 1, 5, 6, 10, 50, 60 Support
Network Controllers:
Intel i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video:
G200 (Nuvoton WPCM450 BMC with graphic controller)
Super I/O:
Nuvoton W83527
Input/Output
Serial ATA:
2 x SATA 3.0 Ports (6Gbps)
8 x SATA 2.0 Ports (3Gbps)
LAN:
2 x RJ45 LAN Ports
1 x RJ45 Dedicated IMPI LAN Ports
USB:
7 USB 2.0 ports total (4 Rear, 2 Via Header, 1 Type A
Video:
1x VGA port
Serial Port/Header:
2x Fast UART 16550 ports
Expansion Slots
PCI-Express:
1x PCI-E 3.0 x16
6x PCI-E 3.0 x8
System Bios
BIOS Type:
64Mb SPI Flash EEPROM with AM BIOS
BIOS Features:
Plug and Play (PnP)
APM 1.2
DMI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Front Panel
Buttons:
Power On/Off Button
System Reset Button
LEDs:
Power LED
Hard Drive Activity LED
2 x Network Activity LEDs
Power Fail LED
Ports:
2 x USB Ports
Drive Bays
Hotswap:
8 x Hotswap 3.5 SAS2/SATA Drive Trays
Peripheral Bay(s) (90 Rotatable): 2 x 5.25 Peripheral Drive Bays
1x 5.25 Bay that fits 3.5 Bay Devices
System Cooling
Fans:
3x 5000 RPM Hot-swap PWM Cooling Fans
2x 5000 RPM Hot-swap Rear Exhaust PWM Fans
Power Supply
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input:
100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output:
4 Amp at +5V standby
75 Amp at +12V
With Power Distributor:
+5V: 45 Amp
+3.3V: 24 Amp
-12V: 0.6 Amp
Certifications:
80 PLUS Platinum Certified
PC Health Monitoring
CPU:
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator.
FAN:
Total of eight fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
Thermal Monitor 2 (TM2) support
PECI
LED:
CPU/System Overheat LED
Suspend Static Indicator LED
UID/Remote LED
Other Features:
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment
RoHS:
RoHS Compliant
Environmental Specs:
Operating Temperature: 10 to 35C (50 to 95F)
Non-operating Temperature: -40 to 70C (-40 to 158F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Form Factor
4U Rackmountable / Tower
Optional Rackmount Kit
Colors
Black
Item Dimension (L"xW"xH")
25.5 x 17.2 x 7
Weight
58.00 lb
Warranty Information
1 Year
