Gigabyte Motherboard GA-J1900N-D3V-B Celeron J1900 8GB DDR3 SATA USB Mini-ITX Bulk Pack
CPU
1.Built in with an Intel Celeron Quad-Core J1900 SoC (2.0 GHz)
( Do not disassemble the onboard SoC and the heatsink by yourself to avoid damage to these components.)
2.2 MB Cache
Memory
1.2 x DDR3/-L SO-DIMM sockets supporting up to 8 GB of system memory
( If only one DDR3/-L memory module is to be installed, be sure to install it in the SODIMM_1 socket.)
2.Dual channel memory architecture
3.Support for DDR3/-L 1333 MHz memory modules
4.Support for non-ECC memory modules
Onboard Graphics
Integrated in the SoC:
1.1 x D-Sub port, supporting a maximum resolution of 2560x1600
2.1 x DVI-D port, supporting a maximum resolution of 1920x1080
( The DVI-D port does not support D-Sub connection by adapter.)
Audio
1.Realtek ALC887 codec
2.High Definition Audio
3.2/4/5.1/7.1-channel To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
4.Support for S/PDIF Out
LAN
1.2 x Realtek GbE LAN chips (10/100/1000 Mbit)
Expansion Slots
1.1 x PCI slot
2.1 x Mini PCI Express x1 slot
(The Mini PCI Express slot conforms to PCI Express 2.0 standard.)
(For Mini-PCIE card/no mSATA card)
Storage Interface
Integrated in the SoC:
1.2 x SATA 3Gb/s connectors
USB
Integrated in the SoC:
1.2 x USB 2.0/1.1 ports (available through the internal USB header)
SoC + Renesas uPD720210 USB 3.0 Hub:
1.4 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
1.1 x 24-pin ATX main power connector
2.1 x 4-pin ATX 12V power connector
3.2 x SATA 3Gb/s connectors
4.1 x CPU fan header
5.1 x system fan header
6.1 x front panel header
7.1 x front panel audio header
8.1 x S/PDIF Out header
9.1 x USB 2.0/1.1 header
10.1 x parallel port header
11.1 x Clear CMOS jumper
12.1 x chassis intrusion header
13.1 x debug card header
Back Panel Connectors
1.1 x PS/2 keyboard port
2.1 x PS/2 mouse port
3.1 x D-Sub port
4.1 x DVI-D port
5.2 x serial ports
6.4 x USB 3.0/2.0 ports
7.2 x RJ-45 ports
8.3 x audio jacks (Line In, Line Out, Mic In)
I/O Controller
1.iTE I/O Controller Chip
H/W Monitoring
1.System voltage detection
2.CPU/System temperature detection
3.CPU/System fan speed detection
4.CPU/System fan speed control
( Whether the fan speed control function is supported will depend on the cooler you install.)
BIOS
1.2 x 64 Mbit flash
2.Use of licensed AMI UEFI BIOS
3.Support for DualBIOS
4.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Operating System
1.Support for Windows 8.1/8 32-bit/64-bit
2.Support for Windows 7 64-bit
( To support Windows 7 64-bit, please update the latest BIOS and drivers.)
Form Factor
1.Mini-ITX Form Factor 17.0cm x 17.0cm
Item Dimension (L"xW"xH"):
14 x 11 x 4
Weight:
13.86 lb
Warranty Information:
3 years
1.Built in with an Intel Celeron Quad-Core J1900 SoC (2.0 GHz)
( Do not disassemble the onboard SoC and the heatsink by yourself to avoid damage to these components.)
2.2 MB Cache
Memory
1.2 x DDR3/-L SO-DIMM sockets supporting up to 8 GB of system memory
( If only one DDR3/-L memory module is to be installed, be sure to install it in the SODIMM_1 socket.)
2.Dual channel memory architecture
3.Support for DDR3/-L 1333 MHz memory modules
4.Support for non-ECC memory modules
Onboard Graphics
Integrated in the SoC:
1.1 x D-Sub port, supporting a maximum resolution of 2560x1600
2.1 x DVI-D port, supporting a maximum resolution of 1920x1080
( The DVI-D port does not support D-Sub connection by adapter.)
Audio
1.Realtek ALC887 codec
2.High Definition Audio
3.2/4/5.1/7.1-channel To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
4.Support for S/PDIF Out
LAN
1.2 x Realtek GbE LAN chips (10/100/1000 Mbit)
Expansion Slots
1.1 x PCI slot
2.1 x Mini PCI Express x1 slot
(The Mini PCI Express slot conforms to PCI Express 2.0 standard.)
(For Mini-PCIE card/no mSATA card)
Storage Interface
Integrated in the SoC:
1.2 x SATA 3Gb/s connectors
USB
Integrated in the SoC:
1.2 x USB 2.0/1.1 ports (available through the internal USB header)
SoC + Renesas uPD720210 USB 3.0 Hub:
1.4 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
1.1 x 24-pin ATX main power connector
2.1 x 4-pin ATX 12V power connector
3.2 x SATA 3Gb/s connectors
4.1 x CPU fan header
5.1 x system fan header
6.1 x front panel header
7.1 x front panel audio header
8.1 x S/PDIF Out header
9.1 x USB 2.0/1.1 header
10.1 x parallel port header
11.1 x Clear CMOS jumper
12.1 x chassis intrusion header
13.1 x debug card header
Back Panel Connectors
1.1 x PS/2 keyboard port
2.1 x PS/2 mouse port
3.1 x D-Sub port
4.1 x DVI-D port
5.2 x serial ports
6.4 x USB 3.0/2.0 ports
7.2 x RJ-45 ports
8.3 x audio jacks (Line In, Line Out, Mic In)
I/O Controller
1.iTE I/O Controller Chip
H/W Monitoring
1.System voltage detection
2.CPU/System temperature detection
3.CPU/System fan speed detection
4.CPU/System fan speed control
( Whether the fan speed control function is supported will depend on the cooler you install.)
BIOS
1.2 x 64 Mbit flash
2.Use of licensed AMI UEFI BIOS
3.Support for DualBIOS
4.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Operating System
1.Support for Windows 8.1/8 32-bit/64-bit
2.Support for Windows 7 64-bit
( To support Windows 7 64-bit, please update the latest BIOS and drivers.)
Form Factor
1.Mini-ITX Form Factor 17.0cm x 17.0cm
Item Dimension (L"xW"xH"):
14 x 11 x 4
Weight:
13.86 lb
Warranty Information:
3 years
