Supermicro Motherboard MBD-X9DRW-7TPF-B Xeon LGA2011 Socket R C602 DDR3 PCI Express SATA
Form Factor
Proprietary WIO
Processor/Cache
CPU:
Dual Socket R (LGA 2011)
Intel Xeon processor E5-2600 and E5-2600 v2 family (up to 135W TDP)
Cache:
Up to 30MB
System Bus:
QPI up to 8 GT/s
System Memory
Memory Capacity:
16x 240-pin DDR3 DIMM sockets
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type:
1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
DIMM Sizes:
32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
Memory Voltage:
1.5V, 1.35V
Error Detection:
Correct Single Bit Errors
Detects Double Bit Errors (Using ECC Memory)
On-Board Devices
Chipset:
Intel C602 Chipset
AHCI SATA:
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SAS:
SAS2 from LSI 2208 (1GB cache)
HW RAID 0, 1, 5, 6, 10, 50, 60 support
Supports up to 16 devices as default, more HDD devices support is also available as an option
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers:
Broadcom BCM 57810S Dual Port 10 Gigabit Ethernet Supports SFP+
Intel i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
(Both CPUs need to be installed for LAN ports 1 and 2 to be enabled)
Video:
Nuvoton WPMC450 with Integrated Graphics
Input/Output
AHCI SATA:
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
SCU SATA:
4x SATA 2.0 Ports (3Gbps)
SAS:
8 SAS2 Ports (6Gb/s)
LAN:
2 SFP+ 10GbE LAN ports
2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB:
5 USB 2.0 Port Total (2 Rear + 2 Via Header + 1 Type A)
Video:
1 VGA Port
Serial Port/Header:
1 Fast UART 16550 Port / 1 Header
TPM:
1 TPM 1.2 20-pin Header
Expansion Slot
PCI-Express:
1 PCI-E 3.0 (x48) for left hand side riser card support
1 PCI-E 3.0 (x16) for right hand side riser card support
System BIOs
BIOs Type:
128Mb SPI Flash EEPROM with AMI BIOS
BIOs Features:
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Management
Software:
SuperDoctor III
Watch Dog
NMI
Optional IPMI 1.5 / 2.0
Power Configuration:
ACPI / APM Power Management
Power-On Mode for AC Power Recovery
PC Health Monitoring
Voltage:
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages
5+1 Phase-switching voltage regulator
Fan:
6x 4-pin fan headers (up to 6 fans)
6x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED:
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features:
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
Operating Environment
Operating Temperature Range: 10 C to 35 C (50 F to 95 F)
Non-Operating Temperature Range: -40 C to 70 C (-40 F to 158 F)
Operating Relative Humidity Range: 8% to 90% (Non-Condensing)
Non-Operating Relative Humidity Range: 5% to 95% (Non-Condensing)
Item Dimension (L"xW"xH")
16.5 x 12.8 x 1
Weight
4.00 lb
Warranty Information
1 Year
Proprietary WIO
Processor/Cache
CPU:
Dual Socket R (LGA 2011)
Intel Xeon processor E5-2600 and E5-2600 v2 family (up to 135W TDP)
Cache:
Up to 30MB
System Bus:
QPI up to 8 GT/s
System Memory
Memory Capacity:
16x 240-pin DDR3 DIMM sockets
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type:
1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
DIMM Sizes:
32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
Memory Voltage:
1.5V, 1.35V
Error Detection:
Correct Single Bit Errors
Detects Double Bit Errors (Using ECC Memory)
On-Board Devices
Chipset:
Intel C602 Chipset
AHCI SATA:
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SAS:
SAS2 from LSI 2208 (1GB cache)
HW RAID 0, 1, 5, 6, 10, 50, 60 support
Supports up to 16 devices as default, more HDD devices support is also available as an option
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers:
Broadcom BCM 57810S Dual Port 10 Gigabit Ethernet Supports SFP+
Intel i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
(Both CPUs need to be installed for LAN ports 1 and 2 to be enabled)
Video:
Nuvoton WPMC450 with Integrated Graphics
Input/Output
AHCI SATA:
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
SCU SATA:
4x SATA 2.0 Ports (3Gbps)
SAS:
8 SAS2 Ports (6Gb/s)
LAN:
2 SFP+ 10GbE LAN ports
2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB:
5 USB 2.0 Port Total (2 Rear + 2 Via Header + 1 Type A)
Video:
1 VGA Port
Serial Port/Header:
1 Fast UART 16550 Port / 1 Header
TPM:
1 TPM 1.2 20-pin Header
Expansion Slot
PCI-Express:
1 PCI-E 3.0 (x48) for left hand side riser card support
1 PCI-E 3.0 (x16) for right hand side riser card support
System BIOs
BIOs Type:
128Mb SPI Flash EEPROM with AMI BIOS
BIOs Features:
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Management
Software:
SuperDoctor III
Watch Dog
NMI
Optional IPMI 1.5 / 2.0
Power Configuration:
ACPI / APM Power Management
Power-On Mode for AC Power Recovery
PC Health Monitoring
Voltage:
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages
5+1 Phase-switching voltage regulator
Fan:
6x 4-pin fan headers (up to 6 fans)
6x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED:
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features:
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
Operating Environment
Operating Temperature Range: 10 C to 35 C (50 F to 95 F)
Non-Operating Temperature Range: -40 C to 70 C (-40 F to 158 F)
Operating Relative Humidity Range: 8% to 90% (Non-Condensing)
Non-Operating Relative Humidity Range: 5% to 95% (Non-Condensing)
Item Dimension (L"xW"xH")
16.5 x 12.8 x 1
Weight
4.00 lb
Warranty Information
1 Year
