SPI Power Supply ATX4-00PN-B204 400W ATX V2.0 12V 12cm Fan

Input Range - 100 to 132Vrms or 200 to 264Vrms, Manual selection
Frequency - 47 to 63Hz
Input Current - 8.5A (RMS) 115Vrms/60Hz, 5A (RMS) 230Vrms/50Hz
Inrush Current - 100A Max cold start, 120A Max warm start measured at 264Vrms/50Hz
Dielectric Withstand - Input to frame ground 1800V AC for 1 second
Efficiency - 70percent minimum measured at nominal AC main voltage and frequency with maximum loads on all outputs
Rise Time - Less than 20ms on all outputs
Hold-up Time - 17ms minimum at nominal input voltage
Power Good Signal - Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current - Not exceed 3.5mA
MTBF - 100,000 hours on maximum load at 25 C
Dimension (WxHxL) - 150x86x140mm / 6x3.4x5.5inches
- Complied with ATX12V 2.0 standard
- High efficiency and reliability
- Remote On/Off function
- Noise Killer (Thermal fan speed control function)
- Low noise and ripple
- Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested